C.H.M. Construction digging track trenching for water infrastructure projects

“If it involves digging dirt, we do it,” is the way Dakota Lunsford responds when asked what his company C.H.M. Construction LLC does. Right now, in Parker County, Texas, outside of Ft. Worth, that’s an excellent business to be in. Communities like Azle and Weatherford are in the middle of a housing development boom. Builders can’t put them up fast enough. Before the first board is framed, underground infrastructure must be installed, which happens to involve digging dirt, which is C.H.M. Construction’s specialty. 

The business was established by Lunsford’s dad in 1998, under the name Lunsford Backhoe Service, when digging dirt used to mean burying sewer septic systems. Since Dakota took over the Springtown, Texas-based business 13 years ago, he rebranded C.H.M. Construction after the names of his wife and two oldest daughters and expanded its service depth to include water, sewer, storm drainage, fiber and telecommunications. He also invested in a lot of equipment to do all the extra work. C.H.M. Construction’s fleet today includes a Vermeer T555 Commander® 3 trencher for water and sewer work, a Vermeer D24x40 Series II Navigator® horizontal directional drill (HDD) for fiber and telecommunications jobs, several backhoes, multiple mini excavators and a couple of dozers.

All dirt is not created equal in Texas

Lunsford says being versatile is the key to his company’s growth. “We do a good job of shifting our focus and with the changing volumes of work out there,” he said. “For the last year and a half, the area’s hot housing market is what’s pushing us. Even though I say if it involves dirt, we can do it; around the Parker County area, much of the new development involves a lot of rock. To do water installs right in those types of conditions take a special machine that delivers the optimal production while keeping our costs in check.” 

The machine Lunsford refers to is the Vermeer T755 Commander 3 trencher that he rented for the first time in 2019 from Vermeer Texas-Louisiana. “We were working on a mainline water installation project in Azle, Texas, and we weren’t keeping up the way I would have liked to,” explained Lunsford. “So, I got on the phone to my sales representative at Vermeer Texas-Louisiana and asked him what he had that could help us get more footage installed faster. We talked about the kind of rock we were working in, and he told me the T755III could handle it.” 

Skeptical about whether it would be able to power through the dense rock they were digging, the C.H.M. Construction crew put the rented trencher to work. 

“That part of Parker County has some of the hardest rock we’ve ever worked in, and we were working on a hill,” explained Lunsford. “Well, when we fired up the T755III trencher, we may have started slow, but once we crested the hill, we were moving about 15 feet (4.6 m) per minute. That’s about as fast as you want to go if you want the rest of the team to keep up with that machine. From there, we averaged out at about 1,100 feet (335.3 m) of trenching and installs a day. It kept everyone’s head down working.” 

New job, same location

At the start of this year, C.H.M. Construction started a month-long project in the same part of Parker County, laying 20,000 feet (6,096 m) of 8-, 6-, 4-, 2- and 1-inch (20.3-, 15.2-, 10.2- and 2.5-cm) PVC pipe at depths of 6 feet (1.8 m). Based on their experience with the T755III the summer before, C.H.M. Construction rented the same machine again. 

“Even though we own a smaller trencher and have several excavators, the T755III with an 8-foot (2.4-m) boom made the most sense for this project,” said Lunsford. “There were some areas on the job where we had cut deeper or required a wider ditch than our trencher was set up to do. Also, excavators would have made a heck of a mess. We would have had to bring in a lot more fill material and haul away the chunky rock we dug up.”

With the T755III, the crew used the material coming from its conveyor belt as fill. “After the trench is cut, we add 6 to 8 inches (15.2 to 20.3 cm) of sand to the bottom of the ditch,” said Lunsford. “We place the pipe in the ground and then cover it with another 8 to 12 inches (20.3 to 30.5 cm) of sand. After that, the rest of the trench is filled in with the material left by the trencher with a dozer. Anything left over is fanned out. We don’t have to haul away any of it.” 

Daily, the 14-person crew working on this water project averaged between 1,500 and 2,000 feet (457.2 and 609.6 m) of trenching, sanding, installing the pipe and backfilling. After that was finished, they made sure everything looked clean so the next construction phase could begin. The 20,000 feet (609.6 m) of water pipe took C.H.M. Construction 25 days to wrap up from start to finish.

Good work leading to more work

With lots being purchased around the area, the build-out timeline for many of these new housing development areas is ahead of schedule. And since water lines are one of the first parts of the process, Lunsford is keeping the T755III around a bit longer than he expected. 

“Developers see us working that machine and the kind of production we’re getting from it, then stop by the site to talk about it,” said Lunsford. “That’s helped us land more work without really having to chase it. So, I think we’ll be here for a while.”

Equipment economics

While the type of work C.H.M. Construction is doing around Parker County is similar, Lunsford is also a big believer in looking at the economics of the equipment they use on a job. “When it comes to this type of work, I try to make equipment decisions based on what is going to be the most efficient way to complete the job,” he explained. “Sure, we already own a track trencher, and we have backhoes, but every time material is handled, there is a type of cost involved. It is measured in time and dollars. So, if a ditch is cut deeper or wider than it needs to be, we’re moving extra material. Bringing in additional backfill and hauling away the material that came out of the trench is a cost. Those costs in time and out-of-pocket expenses really add up in extra time to jobs and profit margins.”

Lunsford believes the right machine for the job is the one that minimizes the amount of material you have to dig up and the number of times it has to be handled. He also looks at a machine’s operating costs and says he’s happy with how the T755III fits into that category.

“Track trenchers are big, powerful machines that do use a lot of fuel, but the extra production offsets that,” he explained. “We also get asked how often we’re replacing teeth on the trencher because of how hard the ground is where we’re working. In this past month, we’ve trenched 20,000 feet (609.6 m) with it and haven’t had to change a tooth yet. So, while I know we’ll have to, it’s sure doesn’t seem like it has a significant impact on our operating costs.”

Efficiency rewards

One of the reasons Lunsford is so invested in finding the most efficient and productive installation methods on projects is because C.H.M. Construction isn’t his only company. He also owns a welding/fabrication shop in Springtown and recently launched an internet service business. So far, his team has bored 30,000 feet (9,144 m) of fiber conduit around the Springtown community. 

“I want to get more fiber laid for that business, but we’re so busy on these water projects, it’s hard to find the time,” he said. “I’m not complaining, though.”

There is no job too big, or too small for C.H.M. Construction. For more information, contact them today. For more information about Vermeer track trenchers, contact your local dealer.

This article contains third-party observations, advice or experiences that do not necessarily reflect the opinions of Vermeer Corporation, its affiliates or its dealers. Testimonials and/or endorsements by contractors in specific circumstances may not be representative of normal circumstances experienced by all customers.

Vermeer Corporation reserves the right to make changes in product engineering, design and specifications; add improvements; or discontinue manufacturing or distribution at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components specific to their global region. Vermeer, the

Vermeer logo, Commander and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2021 Vermeer Corporation. All Rights Reserved.

Get the latest news delivered right to your inbox.

Subscribe Now

Related News Articles

Maximizing productivity in solar construction with technology and the right equipment

GPS technology in solar construction addresses labor shortage challenges and enhances efficiency. The integration of GPS in equipment like the Vermeer PD10R pile driver reduces surveying costs, proving a revolutionary step for the solar construction industry.

Read More

HDD training can help address labor issues

With the high demand of horizontal directional drilling projects, it can be a challenge to find skilled operators. That’s why more HDD contractors are enlisting HDD experts to help train their teams through a combination of online, classroom and simulator tools. Learn how Vermeer HDD training opportunities can maximize the efficiency of your drill operators.

Read More

Consider future work when buying a maxi rig

Before purchasing a maxi rig for your HDD company, it’s important to first assess the benefits and risks. Determining the appropriate size machine, the type of work and where it will be performed, and how onboard technology can help your crew work more efficiently can help to future-proof your investment. Learn about these considerations and more if you’re interested in diversifying your fleet.

Read More